Setup as front page - Add to the collection
current location:Home > particleboard > Particleboard furniture > 正文

The Present Situation of Particleboard Industry

source:未知 edit:admin time:2017-08-11
Particleboard production
(A) China Particle Board 2011 - 2015 production
According to the statistics of the State Forestry Administration, the annual output of Chinese particleboard in 2010 and below is 15 million cubic meters. China's particleboard production in 2011 surge, statistics show that 255.9 million cubic meters / year (Figure 1), 2011-2015 5 years, China's particleboard production in 20 million cubic meters / year or so hovering.
Analysis on the Present Situation of Chinese Particleboard Industry
Figure 1: China's particleboard production in 2011-2015
(2) China's particleboard production in 2016
According to the State Forestry Administration latest statistics, 2016 particleboard production of 26.5 million cubic meters, of which 25.72 million cubic meters of wood particleboard, non-wood particle board 78 million cubic meters. In the wood particleboard, directional particleboard (OSB) production of 91 million cubic meters. China's particleboard production in 2016 than in 2015 increased 6.2 million cubic meters, an increase of 30%.
Second, the Chinese particleboard 2016 capacity and production line distribution
(A) China Particleboard 2016 annual production capacity
According to statistics, as of the end of 2016, included in the statistics of the production in the production of particleboard in 2016 a total of 256, with a total capacity of 17.875 million cubic meters / year.
(2) The main distribution and production capacity of Chinese particleboard production line
China's particleboard production line is mainly distributed in Anhui, Fujian, Guangdong and other 22 provinces, autonomous regions. Beijing, Tianjin, Shanghai, Chongqing, Shanxi, Tibet and other provinces and autonomous regions are not particleboard production line. The distribution of China's particleboard provinces is shown in the table.
Analysis on the Present Situation of Chinese Particleboard Industry
Figure 2: By the end of 2016 China's particleboard production line and production capacity distribution (incomplete statistics)
From the data in Figure 2, by the end of 2016, China's particleboard production line production capacity of more than 1 million m³ / year province, a total of six autonomous regions, namely, Guangdong, Hebei, Shandong, Henan, Guangxi and Fujian Province, including Guangdong, Hebei and Shandong Province is more than or close to 2 million cubic meters / year. Particleboard annual production capacity of 500,000 to 99 million cubic meters / year of the province, autonomous regions have 6, particleboard annual production capacity of 500,000 cubic meters / year below the provinces, autonomous regions have 10.
(C) the characteristics of China's particleboard production line
2016 China's particleboard production line features are:
1) Different areas of particleboard production line equipment level difference
As can be seen from Figure 2, in the provinces of the particleboard production line, some areas to large-scale production line-based, and some areas are still small-scale multi-layer press production line-based, and obsolete equipment. The total number of particleboard production in the province divided by the number of production lines, get the average single-line production capacity. The smaller the average single-line production capacity, indicating that the production line of the region's production scale is too small, the overall level of equipment is low. In 2016, the average single-line production capacity of the national particleboard industry was 70,000 m³ / year / article. The average single-line production capacity of more than 100,000 m³ / year / article provinces only Guangxi Zhuang Autonomous Region, Hubei Province and Shaanxi Province. The average single-line production capacity of 80,000 to 100,000 cubic meters / year / article provinces in Guizhou, Yunnan and Henan Province. In addition, there are three provinces average single-line production capacity of less than 50,000 cubic meters / year / article, the production line is small.
It can be seen from the different parts of China's particleboard production line equipment level difference. The average single-line production capacity of the region, the basic particleboard industry in recent years the rapid development of the province, the new production line to continuous pressure production line mainly to enhance the industry's overall level.
2016 before the end of the production of 256 particleboard production line, a total of continuous pressure particleboard production line 23, with a total capacity of 5.47 million cubic meters / year, accounting for 30% of the total particleboard production capacity. The average single continuous pressure particleboard production line capacity of 238,000 cubic meters / year / article.
2) Production line distribution characteristics
According to the distribution of China's particleboard production line and production capacity (Figure 2) can be seen, some of China's particleboard production capacity is mainly concentrated in the relatively rich areas of raw materials, such as Guangxi, Henan, etc .; some distributed in the furniture and other downstream market gathering areas, such as Guangdong Province and Sichuan Province; another feature is the particleboard production line focused on the logistics to facilitate the developed areas, such as Shandong Province.
3) Newly completed production line between 2014 and 2016
As the Chinese particleboard in 2014 and years ago the market is relatively sluggish, 2014-2016 three years, the new particleboard production line less, 3 years to build a total of 32 production boardboard production line, the total capacity of 3.575 million m³ / year, which continuous Pressure production line 9, the total capacity of 1.74 million m³ / year, just to build a new production line capacity of 50%. In 2014-22016, the new production of particleboard production line, directional particleboard accounted for a relatively high, were built into different sizes of directional particleboard production line 8, with a total capacity of 1.08 million m³ / year, close to the new particleboard production capacity of 1 /
Third, under construction and new particleboard production line and distribution
(A) 2017 under construction and new particleboard production line
With the Chinese particleboard market gradually improved from 2015, the particleboard industry ushered in a new round of investment boom. As of the end of June 2017, it has been determined that the total production capacity of 10,400 m³ / year will be determined in 2017 under construction and the proposed production line (including the production line which has been put into operation in the first half of 2017).
The next more than a year will be built into a new particleboard production line 55, is expected by the end of 2018, particleboard production capacity will increase 10,400 m³ / year. According to the production plan analysis, 2017 production of particleboard production capacity of 7.09 million m³ / year, will be in recent years, the largest additional capacity for particleboard year. On the basis of the existing production capacity of particleboard production line, it is expected that by the end of 2018, China's particleboard production capacity will reach 28 million m³ / year (the current statistics for 27.88 million m³ / year). Of course, the next year due to local environmental control, there will be a considerable number of old production lines were eliminated or discontinued. Preliminary estimates, due to Hebei Province, environmental and corporate pollutant emissions remediation, is expected in Hebei Province, Langfang area will be eliminated in 2017 particleboard behind the production capacity of 1 million m³ / year (2016 capacity of 1.13 million m³ / year). Shandong Heze region will eliminate backward production capacity of 300,000 m³ / year, the other areas are corresponding to some backward production capacity was eliminated. It is expected that China's particleboard production capacity will be around 26 million m³ / year by the end of 2018, and China's particleboard production capacity is growing rapidly.
The average capacity of the 55 particleboard production lines under construction and proposed in 2017 is about 180,000 m³ / year / year, compared with the average single-line production capacity of 70,000 m³ / year / year at the end of 2016. The average single-line production capacity has increased significantly. upgrade. In 55 new particleboard production lines, 34 production lines are continuous pressure particleboard production line, with a total capacity of 7.5 million m³ / year, accounting for 75% of total new capacity. The average single-line production capacity of 220,000 m³ / year / article, compared with the existing continuous pressure particleboard production line single line average capacity of 23.8 million m³ / year / article to be slightly lower, reflecting the current business investment line not only consider the scale of upgrading, but also consider the source of raw materials , Market radiation and other factors, enterprises in the construction of a modest scale of the production line, rather than blindly seeking big.
2017 - 2018 will be new to the particleboard production line 4, the total capacity of 1.07 million m³ / year; straw particleboard production line 6, with a total capacity of 405,000 m³ / year.
2017 - 2018 Another feature of the new particleboard production line is that part of the fiberboard production line rebuilt particleboard production. In the new 55 particleboard production line, there are five fiberboard production line modified particleboard production line, and the most concentrated area is Sichuan Province, there are three modified particleboard production line, in addition to Guangdong Province and Fujian Province. Analysis of the reasons, mainly the enterprise market is mainly the furniture industry, with the rapid development of custom home, the market demand for sheet metal has changed, so some companies are also modified by the fiberboard particleboard to meet market demand.
(Ii) Under construction and anticipated distribution of particleboard production lines in 2018 and distribution of capacity in major areas
Analysis on the Present Situation of Chinese Particleboard Industry
Figure 3: Increased production capacity of particleboard in each province and estimated total production capacity of particleboard in each province in 2018
Figure 3 shows the province's particleboard production line and production capacity, and is expected in 2018 the province's particleboard production line and production capacity.
2017 - 2018 years, the new particleboard production line is mainly concentrated in Shandong Province, Jiangsu Province, Sichuan Province, Guangxi Zhuang Autonomous Region and Hebei Province, the five new total capacity of 6.4 million m³ / year, accounting for the new capacity of the country More than 60%. Especially in Shandong Province, the province added 13 new production lines, the new capacity of 2.135 million m³ / year; followed by Jiangsu Province and Sichuan Province, the new production lines were 4 and 6, the new capacity were 1.25 million m³ / Year and 1.13 million m³ / year, all over 1 million m³ / year. Guangxi Zhuang Autonomous Region new capacity of 990,000 m³ / year; Hebei Province, the new capacity of 930,000 m³ / year. In addition, Henan Province, Hubei Province, Anhui Province, Guangdong Province is also the new capacity of more provinces.
Shandong Province, Guangxi Zhuang Autonomous Region, Henan Province, Hebei Province, production capacity reached 200-400 million m³ / year, Jiangsu Province, Sichuan Province, Sichuan Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Hebei Province, Provincial production capacity are close to 2 million m³ / year. Production provinces of more than 1 million m³ / year are Hubei Province, Anhui Province and Fujian Province. The total capacity of the seven provinces or autonomous regions is expected to be close to 20 million m³ / year in 2018, accounting for about 70% of the country's total capacity.
Analysis on the Present Situation of Chinese Particleboard Industry
Figure 4: Estimation of the distribution of the main provinces of China's main particleboard in 2018
From Figure 4 can be seen in the production and construction of new particleboard production capacity of 70% of the main concentration of Hebei, Shandong, Jiangsu and other North China and East China, Guangxi, Guangdong, South China and Sichuan where the southwest region. And China's Qinghai, Gansu, Shanxi and other provinces basically no scale on the particleboard production line.
(C) under construction and new production line characteristics
Throughout China's construction and new particleboard production line, with the following obvious features:
1) High regional concentration
The new particleboard production capacity is mainly concentrated in the east and north China, especially in the surrounding areas of Henan, Shandong and Jiangsu, for the new particleboard production line is very intensive areas. Analysis of the reasons, on the one hand the region is relatively rich in plant resources, on the other hand, regional logistics is convenient, there is a better downstream market base.
2) new production single-line high production capacity, rapid industrial upgrading
Statistics show that 2017-2018 new production line average single-line production capacity of 180,000 m³ / year / article, and on behalf of the advanced level of particleboard production of continuous pressure line accounted for 61.8% of the proportion of new continuous pressure line to achieve 75%. This shows that 2017-2018 China's particleboard production line equipment level is rapidly upgrading, is expected by the end of 2018, China's particleboard continuous pressure production line will reach 57, production capacity close to 13 million m³ / year, about the year the total cost of particleboard 50% The

related articles:

Reviews:

发表评论
请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
评价:
表情:
用户名: 验证码:点击我更换图片

wood www.zhandiyng.com Solid wood board,plywood,decorative panels,blockboard,particleboard, fire board,melamine

Copyright © 2016-2018 Solid wood panels, plywood, decorative panels, blockboard, particleboard, MDF, fire board, melamine board, wood board, wood board, wood Power by

Top
www.000webhost.com
www.000webhost.com
www.000webhost.com
www.000webhost.com
www.000webhost.com
www.000webhost.com
000webhost logo